Trustpilot
top of page
Bondtech CHT® Coated Brass Nozzle, 1pc
  • Bondtech CHT® Coated Brass Nozzle, 1pc

    Main Advantages

    • Higher melt capacity by increasing the surface area of the heating walls
    • Affordable price
    • Machined with ultra-precision
    • Brass nozzle with Nickel coated surface
    • Follows the RepRap standard (M6×1×7.5×12.5)
    • May be used with 1.75 or 2.85mm hotends.

     

    Advantages of the Bondtech CHT™ technology:

    Bondtech CHT™ nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.

     

    Core Heating is a patented technology

    Registration number: EP3445568A1

     

    Nozzles for 3D printers made of metal with at least one or a multitude of holes to increase the surface area of the heating walls.

     

    Advantages of the Nickel Coatin

    A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.

     

    Recommended Materials

    Use this nozzle with the following materials:

    • PLA
    • ABS
    • HIPS
    • PC
    • TPU
    • TPE
    • Nylon
    • PETG
    • ASA
    • PP
    • PVA

     

    For technical and abrasive materials we recommend to use other nozzles in our range.

     

    Different nozzle sets for different materials

    We recommend you to have several sets of nozzles because:

    • Using different materials with the same nozzles causes deposit build-up inside the nozzle.
    • These deposits will cause blockages.
    • We recommend changing nozzles when changing materials.

     

    Check the White Paper:

    "Increasing Melt Capacity With 3 Nozzle Features"

     

    They are manufactured by Bondtech in-house, and will fit the following hotends/blocks:

    • Mosquito® / Magnum
    • Mosquito® Liquid
    • Mosquito® Magnum+
    • Copperhead™
    • E3D V4, V5 and V6 blocks
    • E3D Chimera and Kraken
    • RepRap M6
    • Technical Specifications

      Brand Bondtech
      Type RepRap M6 1,75mm
      Material Nickel Coated Brass
      Diameter mixed mm
      Packaging 1
      Fits for Formbot Raptor
        Formbot T-Rex 2+ 500 mm
        Vivedino Formbot Raptor 2.0 - 500mm
        Vivedino Formbot Raptor 2.0 - 700mm
        Vivedino Formbot T-Rex 3.0 - 500mm
        Vivedino Formbot T-Rex 3.0 - 700mm
        INTAMSYS FUNMAT HT
        INTAMSYS FUNMAT HT Enhanced
        Anycubic Mega X
        Anycubic Mega Zero
        Vivedino Formbot T-Rex 3.0+ - 500 Dual Extruder Idex - 400x400x500mm - New upgraded version
        Vivedino Formbot T-Rex 3.0+ - 700 Dual Extruder Idex - 400x400x700mm - New upgraded version
        Vivedino Formbot Troodon - 400x400x500mm - Core XY Fully Enclosed
        Vivedino Formbot Troodon - 300x300x400mm - Core XY Fully Enclosed
        Vivedino Formbot Raptor 2.0+ -5 400x400x500mm - New upgraded version
        Vivedino Formbot Raptor 2.0+ -7 400x400x700mm - New upgraded version
        Formbot Voron V0 120x120x120mm
        Formbot Voron 2.4 300x300x300mm
        Formbot Voron 2.4 350x350x350mm
        Prusa i3MK2/MK3
        E3D V5-V6
        Mosquito® / Magnum
        Mosquito® Liquid
        Mosquito® Magnum+
        Copperhead™
        E3D V4, V5 & V6 Blöcke
        E3D Chimera & Kraken
    €29.90Price
    Tax Included
    Out of Stock

    Best sellers